series am1n-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.h 1 of 4 north america only features: ? rohs compliant ? ? 24 pin dip package ? ? low profile plastic package ? ? high efficiency up to 80% ? models single output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) input current full load | no load (ma) max capacitive load (f) efficiency (%) am1n-0505sh60-nz 4.5-5.5 5 200 6000 263 | 25 220 76 am1n-0509sh60-nz 4.5-5.5 9 111 6000 263 | 25 220 80 am1n-1205sh60-nz 10.8-13.2 5 200 6000 110 | 15 220 77 am1n-1209sh60-nz 10.8-13.2 9 111 6000 110 | 15 220 80 am1n-1212sh60-nz 10.8-13.2 12 84 6000 110 | 15 220 79 am1n-1215sh60-nz 10.8-13.2 15 67 6000 110 | 15 220 79 models dual output model input voltage (v) output voltage (v) output current max (ma) isolation (vdc) input current full load | no load (ma) max capacitive load (f) efficiency (%) am1n-0505dh60-nz 4.5-5.5 5 100 6000 263 | 25 100 76 am1n-0509dh60-nz 4.5-5.5 9 55 6000 263 | 25 100 78 am1n-0512dh60-nz 4.5-5.5 12 42 6000 263 | 25 100 79 am1n-1205dh60-nz 10.8-13.2 5 100 6000 110 | 15 100 76 am1n-1212dh60-nz 10.8-13.2 12 42 6000 110 | 15 100 78 am1n-1215dh60-nz 10.8-13.2 15 33 6000 110 | 15 100 79 note: all specifications are m easured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated outpu t load unless otherwise specified. input specifications parameters nominal typical maximum units voltage range 5 12 4.5-5.5 10.8-13.2 vdc filter capacitor isolation specifications parameters conditions typical rated units tested i/o voltage 60 sec 6000 vdc resistance > 1000 mohm capacitance 60 pf output specifications parameters conditions typical maximum units voltage accuracy see tolerance envelope graph short circuit protection continuous with auto recovery line voltage regulation (single) for 1.0% of vin 1.2 % line voltage regulation (dual) for 1.0% of vin 1.2 % load voltage regulation (single) load 10 ? 100% 10 % load voltage regulation (dual) load 10 ? 100% 10 % temperature coefficient 0.03 %/ o c ripple & noise at 20mhz bandwidth 100 mv p-p click on series name for product info on aimtec.com
series am1n-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.h 2 of 4 north america only general specifications parameters conditions typical maximum units switching frequency 100% load 50 khz operating temperature without derating -40 to +85 o c storage temperature -55 to +125 o c max case temperature 95 o c cooling free air convection humidity 90 % case material plastic ul94-vo weight 16 g dimensions (l x w x h) 1.27 x 0.58 x 0.37 inches 32.30 x 14.70 x 9.40mm mtbf >3 500 000 hrs (mil-hdbk -217f, ground benign, t=+25 o c) note: all specifications are m easured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated outpu t load unless otherwise specified. safety specifications parameters agency approvals culus standards ul60950-1 pin out specifications external capacitor ? single output (table 1) external capacitor ? dual output dimensions footprint 2.54 (0.10) 2.54 (0.01) 1.00 0 + 0.15/-0 pin single dual 1 + v input + v input 2 - v input - v input 8,17 n.c. -v output 10,15 -v output common 12,13 +v output +v output vin (vdc) external capacitor (f) vout (vdc) external capacitor (f) 5 4.7 5 10 12 2.2 9 4.7 24 1 12 2.2 - 15 1 vin (vdc) external capacitor (f) vout (vdc) external capacitor (f) 5 4.7 5 4.7 12 2.2 9 2.2 24 1 12 1 - - 15 0.47 32.30 (1.27) 14.70 (0.58) 9.40 (0.37) 27.94 (1.10) 4.00 (0.16) side view top view 0.65 (0.03) 2.54 (0.10)
series am1n-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.h 3 of 4 north america only block diagram single output block diagram dual output recommended class b emi circuit load accuracy tolerance graph vin (vdc) c1 / c2 ldm c3 5 4.7 f / 50v 6.8 h 10 f 12 4.7 f / 50v 6.8 h 4.7 f 24 4.7 f / 50v 6.8 h 2.2 f
series am1n-nz 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.h 4 of 4 north america only typical efficiency example charts note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without not ice. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency ce rtifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive test ing or chemical analysis on all internal components and chemicals at the time of publishing th is document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in haz ardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s standard terms of sale available at www.aimtec.com. 0 10 20 30 40 50 60 70 80 90 100 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% eff ? % loading ? % am1n \ 0505s \ nz ? efficiency ? vs. ? loading 0 10 20 30 40 50 60 70 80 90 100 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% eff ? % loading ? % am1n \ 1212s \ nz ? efficiency ? vs. ? loading
|
